Switch on to the Worlds most intelligent battery chargers: 10A
FEATURES
SPECS
EXTRAS
FEATURES
7 Stage Charging
Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers.
Multi Chemistry
The multi chemistry function allows you to set the charging profile to suit the battery’s chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life.
Power Supply
The smaller models (7,10, 15A) can be used as a power supply which is great as a memory saver when changing your vehicle battery so you don’t lose important radio and computer information. You can also run 12V appliances direct from the battery clamps up to the rated output current, ideal for use around the house.
User Friendly Controls
All Intelli-Charge chargers feature user-friendly displays so you can quickly customise the charge settings and monitor the charger’s performance. What’s more, the chargers remember the last settings used even when the power has been turned off.
Short Circuit Protection
Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode.
Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times.
Shock Proof & Dust Proof
Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard.
In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations.
2 Year Warranty
Australian designed and engineered, quality is guaranteed and all battery chargers include a 2 year comprehensive warranty.
SPECIFICATIONS
TYPE
7 stage
INPUT
240VAC, 50Hz
INPUT POWER
288W
OUTPUT VOLTAGE
12V
OUTPUT CURRENT
10A
MINIMUM START VOLTAGE
2.5V
BACK DRAIN
1mA
CHARGE CONTROL
DESULPHATION
High Frequency Pulse charge up to 11V
SOFT START
5A up to 12V
BULK
10A up to:
14.1V (GEL)
14.4V (AGM)
14.7V (WET)
14.7V (CALCIUM)
ABSORPTION
Constant voltage until current drops to 1.5A
EQUALIZATION
Contact current (2.0A) up to 16V then hold for 1 hour or 12 hour timeout
ANALYSIS
Monitors battery for 90 sec
RECONDITION
Contant current (1.5A for 4 hours limited to: 14.1V (GEL)
14.4V (AGM)
16V (WET)
16V (CALCIUM)
FLOAT
13.7V
POWER SUPPLY
SETVOLTAGE
13.8VDC
MAXIMUM CURRENT
10A
BATTERY RANGE
DEEP CYCLE
70-200Ah
AUTOMOTIVE
450-1000CCA
MARINE
500-1200MCA
TYPES OF BATTERIES
Most types of lead acid batteries including GEL, AGM, WET CELL and CALCIUM
Switch on to the Worlds most intelligent battery chargers: 15A
FEATURES
SPECS
EXTRAS
FEATURES
7 Stage Charging
Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers.
Multi Chemistry
The multi chemistry function allows you to set the charging profile to suit the battery’s chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life.
Power Supply
The smaller models (7,10, 15A) can be used as a power supply which is great as a memory saver when changing your vehicle battery so you don’t lose important radio and computer information. You can also run 12V appliances direct from the battery clamps up to the rated output current, ideal for use around the house.
User Friendly Controls
All Intelli-Charge chargers feature user-friendly displays so you can quickly customise the charge settings and monitor the charger’s performance. What’s more, the chargers remember the last settings used even when the power has been turned off.
Short Circuit Protection
Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode.
Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times.
Shock Proof & Dust Proof
Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard.
In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations.
2 Year Warranty
Australian designed and engineered, quality is guaranteed and all battery chargers include a 2 year comprehensive warranty.
SPECIFICATIONS
TYPE
7 stage
INPUT
240VAC, 50Hz
INPUT POWER
408W
OUTPUT VOLTAGE
12V
OUTPUT CURRENT
15A
MINIMUM START VOLTAGE
2.5V
BACK DRAIN
1mA
CHARGE CONTROL
DESULPHATION
High Frequency Pulse charge up to 11V
SOFT START
7.5A up to 12V
BULK
15A up to:
14.1V (GEL)
14.4V (AGM)
14.7V (WET)
14.7V (CALCIUM)
ABSORPTION
Constant voltage until current drops to 2.25A
EQUALIZATION
Contact current (2.2A) up to 16V then hold for 1 hour or 12 hour timeout
ANALYSIS
Monitors battery for 90 sec
RECONDITION
Contant current (2.25A for 4 hours limited to: 14.1V (GEL)
14.4V (AGM)
16V (WET)
16V (CALCIUM)
FLOAT
13.7V
POWER SUPPLY
SETVOLTAGE
13.8VDC
MAXIMUM CURRENT
15A
BATTERY RANGE
DEEP CYCLE
85-300Ah
AUTOMOTIVE
465-2000CCA
MARINE
600-2500MCA
TYPES OF BATTERIES
Most types of lead acid batteries including GEL, AGM, WET CELL and CALCIUM
Switch on to the Worlds most intelligent battery chargers: 25A
FEATURES
SPECS
EXTRAS
FEATURES
7 Stage Charging
Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers.
Multi Chemistry
The multi chemistry function allows you to set the charging profile to suit the battery’s chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life.
Adjustable Current
Intelli-Charge allows you to adjust and select the charge rate from as low as 2 Amps to best suit the size of your batteries.
Power Supply
In the larger models (25, 35, 50A, 8A/24V), power supply operates as a float charge (constant voltage) and is ideal for maintaining a battery while running an appliance or load from the battery without risk of overcharging the battery.
User Friendly Controls
All Intelli-Charge chargers feature user-friendly displays so you can quickly customise the charge settings and monitor the charger’s performance. What’s more, the chargers remember the last settings used even when the power has been turned off.
LCD Display & Remote Control
Control and monitor the charger’s performance from a remote control display, allowing the charger to be mounted out of the way and out of sight. The battery charger and remote are synchronised for operation either locally or by remote.
Temperature Compensation
The temperature sensor monitors the battery temperature and adjusts (compensates) the charger’s output to prevent overcharging. This is ideal for batteries used in warmer climates or environments.
Short Circuit Protection
Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode.
Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times.
Shock Proof & Dust Proof
Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard.
In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations.
2 Year Warranty
Australian designed and engineered, quality is guaranteed and all battery chargers include a 2 year comprehensive warranty.
SPECIFICATIONS
TYPE
7 stage
INPUT
240VAC, 50Hz
INPUT POWER
792W
OUTPUT VOLTAGE
12V
OUTPUT CURRENT
2,6,12,25A
MINIMUM START VOLTAGE
2.5A
BACK DRAIN
1mA
CHARGE CONTROL
DESULPHATION
High Frequency Pulse charge up to 11V
SOFT START
Half the rated set current up to 12V
BULK
Set current up to:
14.1V (GEL)
14.4V (AGM)
14.7V (WET)
14.7V (CALCIUM)
ABSORPTION
Constant voltage until current drops to:
2 Amp settings: 0.3A
6 Amp setting: 0.9A
12 Amp settings: 1.8A
25 Amp settings: 3.75A
EQUALIZATION
Contact current (2.0-3.75A) up to 16V then hold for 1 hour or 12 hour timeout
ANALYSIS
Monitors battery for 90 sec
RECONDITION
Contant current (0.3-3.75A) for 4 hours limited to: 14.1V (GEL)
14.4V (AGM)
16V (WET)
16V (CALCIUM)
FLOAT
13.7V
POWER SUPPLY
SETVOLTAGE
13.8V
MAXIMUM CURRENT
25A
BATTERY RANGE
DEEP CYCLE
14-500Ah
AUTOMOTIVE
80-3000CCA
MARINE
110-4200MCA
TYPES OF BATTERIES
Most types of lead acid batteries including GEL, AGM, WET CELL and CALCIUM
Switch on to the Worlds most intelligent battery chargers: 25A
FEATURES
SPECS
EXTRAS
FEATURES
7 Stage Charging
Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers.
Multi Chemistry
The multi chemistry function allows you to set the charging profile to suit the battery’s chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life.
Adjustable Current
Intelli-Charge allows you to adjust and select the charge rate from as low as 2 Amps to best suit the size of your batteries.
Power Supply
In the larger models (25, 35, 50A, 8A/24V), power supply operates as a float charge (constant voltage) and is ideal for maintaining a battery while running an appliance or load from the battery without risk of overcharging the battery.
User Friendly Controls
All Intelli-Charge chargers feature user-friendly displays so you can quickly customise the charge settings and monitor the charger’s performance. What’s more, the chargers remember the last settings used even when the power has been turned off.
LCD Display & Remote Control
Control and monitor the charger’s performance from a remote control display, allowing the charger to be mounted out of the way and out of sight. The battery charger and remote are synchronised for operation either locally or by remote.
Temperature Compensation
The temperature sensor monitors the battery temperature and adjusts (compensates) the charger’s output to prevent overcharging. This is ideal for batteries used in warmer climates or environments.
Short Circuit Protection
Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode.
Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times.
Shock Proof & Dust Proof
Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard.
In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations.
2 Year Warranty
Australian designed and engineered, quality is guaranteed and all battery chargers include a 2 year comprehensive warranty.
SPECIFICATIONS
TYPE
7 stage
INPUT
240VAC, 50Hz
INPUT POWER
1080W
OUTPUT VOLTAGE
12V
OUTPUT CURRENT
2,8,16,35A
MINIMUM START VOLTAGE
2.5A
BACK DRAIN
1mA
CHARGE CONTROL
DESULPHATION
High Frequency Pulse charge up to 11V
SOFT START
Half the rated set current up to 12V
BULK
Set current up to:
14.1V (GEL)
14.4V (AGM)
14.7V (WET)
14.7V (CALCIUM)
ABSORPTION
Constant voltage until current drops to:
2 Amp setting: 0.3A
8 Amp setting: 1.2A
16 Amp setting: 2.4A
35 Amp setting: 5.25A
EQUALIZATION
Contact current (2.0-5.25A) up to 16V then hold for 1 hour or 12 hour timeout
ANALYSIS
Monitors battery for 90 sec
RECONDITION
Contant current (0.3-5.25A) for 4 hours limited to: 14.1V (GEL)
14.4V (AGM)
16V (WET)
16V (CALCIUM)
FLOAT
13.7V
POWER SUPPLY
SETVOLTAGE
13.8V
MAXIMUM CURRENT
35A
BATTERY RANGE
DEEP CYCLE
14-700Ah
AUTOMOTIVE
80-4200CCA
MARINE
110-5800MCA
TYPES OF BATTERIES
Most types of lead acid batteries including GEL, AGM, WET CELL and CALCIUM
Switch on to the Worlds most intelligent battery chargers: 50A
FEATURES
SPECS
EXTRAS
FEATURES
7 Stage Charging
Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers.
Multi Chemistry
The multi chemistry function allows you to set the charging profile to suit the battery’s chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life.
Adjustable Current
Intelli-Charge allows you to adjust and select the charge rate from as low as 2 Amps to best suit the size of your batteries.
Power Supply
In the larger models (25, 35, 50A, 8A/24V), power supply operates as a float charge (constant voltage) and is ideal for maintaining a battery while running an appliance or load from the battery without risk of overcharging the battery.
User Friendly Controls
All Intelli-Charge chargers feature user-friendly displays so you can quickly customise the charge settings and monitor the charger’s performance. What’s more, the chargers remember the last settings used even when the power has been turned off.
LCD Display & Remote Control
Control and monitor the charger’s performance from a remote control display, allowing the charger to be mounted out of the way and out of sight. The battery charger and remote are synchronised for operation either locally or by remote.
Temperature Compensation
The temperature sensor monitors the battery temperature and adjusts (compensates) the charger’s output to prevent overcharging. This is ideal for batteries used in warmer climates or environments.
Short Circuit Protection
Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode.
Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times.
Shock Proof & Dust Proof
Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard.
In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations.
2 Year Warranty
Australian designed and engineered, quality is guaranteed and all battery chargers include a 2 year comprehensive warranty.
SPECIFICATIONS
TYPE
7 stage
INPUT
240VAC, 50Hz
INPUT POWER
1488W
OUTPUT VOLTAGE
12V
OUTPUT CURRENT
2,6,12,,25,50A
MINIMUM START VOLTAGE
2.5V
BACK DRAIN
1mA
CHARGE CONTROL
DESULPHATION
High Frequency Pulse charge up to 11V
SOFT START
Half the rated set current up to 12V
BULK
Set current up to:
14.1V (GEL)
14.4V (AGM)
14.7V (WET)
14.7V (CALCIUM)
ABSORPTION
Constant voltage until current drops to:
2 Amp setting: 0.3A
6 Amp setting: 0.9A
12 Amp setting: 1.8A
25 Amp setting: 3.75A
50 Amp setting: 7.5A
EQUALIZATION
Contact current (2.0-7.5A) up to 16V then hold for 1 hour or 12 hour timeout
ANALYSIS
Monitors battery for 90 sec
RECONDITION
Contant current (0.3-7.5A) for 4 hours limited to: 14.1V (GEL)
14.4V (AGM)
16V (WET)
16V (CALCIUM)
FLOAT
13.7V
POWER SUPPLY
SETVOLTAGE
13.8V
MAXIMUM CURRENT
50A
BATTERY RANGE
DEEP CYCLE
14-1000Ah
AUTOMOTIVE
80-6000CCA
MARINE
110-8300MCA
TYPES OF BATTERIES
Most types of lead acid batteries including GEL, AGM, WET CELL and CALCIUM
Switch on the the Worlds most intelligent battery chargers: 7A
FEATURES
SPECS
EXTRAS
FEATURES
7 Stage Charging
Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers.
Multi Chemistry
The multi chemistry function allows you to set the charging profile to suit the battery’s chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life.
Power Supply
The smaller models (7,10, 15A) can be used as a power supply which is great as a memory saver when changing your vehicle battery so you don’t lose important radio and computer information. You can also run 12V appliances direct from the battery clamps up to the rated output current, ideal for use around the house.
User Friendly Controls
All Intelli-Charge chargers feature user-friendly displays so you can quickly customise the charge settings and monitor the charger’s performance. What’s more, the chargers remember the last settings used even when the power has been turned off.
Short Circuit Protection
Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode.
Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times.
Shock Proof & Dust Proof
Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard.
In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations.
2 Year Warranty
Australian designed and engineered, quality is guaranteed and all battery chargers include a 2 year comprehensive warranty.
SPECIFICATIONS
TYPE
7 stage
INPUT
240VAC, 50Hz
INPUT POWER
216W
OUTPUT VOLTAGE
12V
OUTPUT CURRENT
7A
MINIMUM START VOLTAGE
2.5V
BACK DRAIN
1mA
CHARGE CONTROL
DESULPHATION
High Frequency Pulse charge up to 11VSoft
SOFT START
3.5A up to 12V
BULK
7A up to:
14.1V (GEL)
14.4V (AGM)
14.7V (WET)
14.7V (CALCIUM)
ABSORPTION
Constant voltage until current drops to 1.05A
EQUALISATION
Contact current (2.0A) up to 16V then hold for 1 hour or 12 hour timeout
ANALYSIS
Monitors battery for 90 sec
RECONDITION
Contant current (1.05A for 4 hours limited to: 14.1V (GEL)
14.4V (AGM)
16V (WET)
16V (CALCIUM)
FLOAT
13.7V
POWER SUPPLY
SETVOLTAGE
13.8VDC
MAXIMUM CURRENT
7A
BATTERY RANGE
DEEP CYCLE
50-140Ah
AUTOMOTIVE
300-800CCA
MARINE
350-900MCA
TYPES OF BATTERIES
Most types of lead acid batteries including GEL, AGM, WET CELL and CALCIUM
Switch on to the Worlds most intelligent battery chargers: 24V 8A
FEATURES
SPECS
EXTRAS
FEATURES
7 Stage Charging
Intelli-Charge battery chargers use intelligent electronics to monitor the charging process and deliver an advanced 7-stage charge to your battery. 7-stage charging is a very comprehensive and accurate charging technique that gives your battery longer life and better performance compared to using traditional chargers.
Multi Chemistry
The multi chemistry function allows you to set the charging profile to suit the battery’s chemistry type (GEL, AGM, WET and Calcium). This ensures correct and thorough charging and maximises battery performance and battery life.
Adjustable Current
Intelli-Charge allows you to adjust and select the charge rate from as low as 2 Amps to best suit the size of your batteries.
Power Supply
In the larger models (25, 35, 50A, 8A/24V), power supply operates as a float charge (constant voltage) and is ideal for maintaining a battery while running an appliance or load from the battery without risk of overcharging the battery.
User Friendly Controls
All Intelli-Charge chargers feature user-friendly displays so you can quickly customise the charge settings and monitor the charger’s performance. What’s more, the chargers remember the last settings used even when the power has been turned off.
LCD Display & Remote Control
Control and monitor the charger’s performance from a remote control display, allowing the charger to be mounted out of the way and out of sight. The battery charger and remote are synchronised for operation either locally or by remote.
Temperature Compensation
The temperature sensor monitors the battery temperature and adjusts (compensates) the charger’s output to prevent overcharging. This is ideal for batteries used in warmer climates or environments.
Short Circuit Protection
Projecta Intelli-Charge battery chargers feature short circuit protection, even in Power Supply mode.
Designed to prevent the output leads from sparking during charging from accidental reverse connection or short circuit, Projecta gives you peace of mind that the charger will remain safe at all times.
Shock Proof & Dust Proof
Constructed from extruded aluminium, Intelli-Charge battery chargers are shock-proof, dust-proof and have been rigorously vibration tested and passed both a military and caravan standard.
In addition, the circuit boards have been conformal coated to protect against moisture and dust and other elements so they are suitable for use in a range of locations.
2 Year Warranty
Australian designed and engineered, quality is guaranteed and all battery chargers include a 2 year comprehensive warranty.
SPECIFICATIONS
TYPE
7 stage
INPUT
240VAC, 50Hz
INPUT POWER
480W
OUTPUT VOLTAGE
24V
OUTPUT CURRENT
2,4,6,8A
MINIMUM START VOLTAGE
4.5V
BACK DRAIN
1mA
CHARGE CONTROL
DESULPHATION
High Frequency Pulse charge up to 11V
SOFT START
Half the rated set current up to 24V
BULK
Set current up to:
28.2V (GEL)
28.8V (AGM)
29.4V (WET)
29.4V (CALCIUM)
ABSORPTION
Constant voltage until current drops to:
2 Amp setting: 0.3A 4 Amp setting: 0.6A 6 Amp setting: 0.9A 8 Amp setting: 1.2A
EQUALIZATION
Contact current (2.0A) up to 32V then hold for 1 hour or 12 hour timeout
ANALYSIS
Monitors battery for 90 sec
RECONDITION
Contant current (0.3-1.2A) for 4 hours limited to: 28.2V (GEL)
28.8V (AGM)
32.0V (WET)
32.0V (CALCIUM)
FLOAT
27.4V
POWER SUPPLY
SETVOLTAGE
27.6V
MAXIMUM CURRENT
8A
BATTERY RANGE
DEEP CYCLE
14-160Ah
AUTOMOTIVE
80-1000CCA
MARINE
110-1300MCA
TYPES OF BATTERIES
Most types of lead acid batteries including GEL, AGM, WET CELL and CALCIUM
