|
|
| 
|
|
|
|
AC150
|
 |
Automatic 12V 1.5A*
900mA Battery Charger
Charge N' Maintain |
|
|
 Ideal for maintaining infrequently used
vehicles such as motorcycles, jet skis and
ride on mowers. |
|
|
Charge N' Maintain - Automatic Charging
Automatically stops charging when the battery is full. You can leave the charger connected to the battery without the risk of overcharging.
|
Charge N' Maintain - Automatic Maintenance
Once the battery is full, the charger automatically starts to maintain the battery. The charger monitors the battery voltage and continues to top up the battery, keeping it fully charged and ready for use. |
Thermal Overload/Polarity Protection
Prevents the output leads from sparking due to accidental reverse connection or short circuit, increasing safety. |
60cm Wiring Harness
A 60cm harness allows for easy connection to vehicles that have hard to reach batteries. Includes an inline fuse to protect the harness from short circuits. |
| * The term "1.5A" as opposed to "900mA" is an Amps RMS rating used as an industry reference and not the actual DC output. |
|
| PART NO. |
AC150 |
| TYPE |
Automatic |
| INPUT |
240V, 50Hz, 17W |
| OUTPUT |
900mA (1.5A RMS*) at 12.0V |
CHARGE CONTROL
|
Cut out: 14.2V
Cut in: 13.4V
Start: 5.0V |
| APPROVALS |
Electrical Safety, EMC |
| RED LIGHT ON |
Power on |
AMBER
LIGHT ON |
Charging |
GREEN LIGHT ON
|
Fully charged. Turn off the charger and disconnect. |
| AC150 |
VOLTAGE |
BATTERY SIZE |
CHARGE TIME |
| TYPE |
12V |
100-350CCA |
Maintenance |
| INPUT |
12V |
150-400MCA |
Maintenance |
| OUTPUT |
12V |
7-24Ah |
10-30 hrs |
|
|
|
|
